ZNC EDM Y SERIES

Y430-ZNC/MP52 EDM machine

ZNC EDM machine
Features
5μlinear scale feedback 
More than 500 ECODE data
7 steps automatic fine machining
High C/P value

Machine Specifications

 
ITEM UNIT Y540-ZNC
MP52
Y430-ZNC
MP52
Y430A**-ZNC
MP52
Y320C*-ZNC
MP52
Y320A**-ZNC
MP52
Work tank internal dimensions W x D x H (mm) 1200 x 700 x 430 1000 x 600 x 400 1000 x 600 x 400 880x 500 x 320 880 x 500 x 320
Max. workpiece dimensions W x D x H (mm) 960 x 560 x 380 800 x 500 x 350 800 x 500 x 350 650 x 350 x 270 650 x 350 x 270
Max. workpiece weight kg 1000 600 600 400 400
Max. electrode weight kg 120 100 100 100 100
X、Y、Z axis stroke mm 500 x 400 x 250 400 x 300 x 200 400 x 300 x 200 300 x 225 x 200 300 x 225 x 200
Z back slide travel mm 200 200 200 200 200
Table dimensions W x D (mm) 900 x 650 800 x 450 800 x 450 600 x 300 600 x 300
Distance between plate and table mm 350 ~ 800 290 ~ 690 290 ~ 690 210 ~ 610 210 ~ 610
Machine tool dimensions W x D x H (mm) 1660 x 1650x2270 1370 x 1410x2120 1790 x 1880x2220 1400 x 1320x2100 1790 x 1610x2100
Volume of electric cabinet  W x D x H (mm) 650x1080x1750
Machine tool weight kg 2070 1665 2050 1205 1450
Weight of electric cabinet kg 360kg(30A) / 385kg(50A) / 415kg(75A) / 465kg(100A)
Available power supplies type  30A(4KVA) / 50A(5.5KVA) / 75A(8KVA) / 100A(12KVA)
Dielectric reservoir capacity L 500 400 400 200 200
Layout(AXB)(CXD) mm (3850x2750)(3250x1945) (3450x2650)(2850x1850) (2650x2600)(2050x1800) (2530x2150)(1930x1350) (2150x2150)(1550x1350)
Setting unit increments μm 5 5 5 5 5
Optical scale resolution μm 5 5 5 5 5
 
*C means Compact space design-2 pcs.
**A means Compact space design-all in one.
Layout: A x B: (Machine + Reserve Space), C x D: (Machine).
The work tank internal dimensions means the applicable range on the table.
Specifications are subject to change without prior notice due to continual research and development.
STANDARD ACCESSORIES:Worklamp, Fire extinguisher, Flush plate, Tool box, Electrode holder.
 

Optional equipment

 
ITEM TNC ZNC
Standard discharge circuit and control system
  1. TP Transistor Circuit
  2. SL Super-low wear circuit
  3. ACC adaptive control system
  1. TP Transistor Circuit
  2. SL Super-low wear circuit
  3. ACC adaptive control system
Optional discharge circuit and control system  
  1. Large area machining circuit
  2. Micro-finish machining circuit
  3. Cemented carbide machining circuit
  4. Orbit device
  1. Micro-finish machining circuit
  2. Cemented carbide machining circuit
  3. Orbit device
 
When variation of the AC power source is +15% over or -10% under, we recommend using AVR to improve stability.
 
TOP